| Description |
Single Phase |
| 1.Capacity |
1 KVA to 50 KVA |
| 2.Input Voltage |
190-270V / 170-270V |
| 3.Output Voltage |
220/230/240V(Settable) |
| 4.Nature Of Cooliing |
Aircooled/Oilcooled |
| 5.Output Voltage Regulation |
+1% |
| 6.Efficeincy |
>98% |
| 7.Input Frequency |
50Hz,+3Hz |
| 8.Effect of Load Power Factor |
Nill on output voltage |
| 9.Speed Of Correction |
30v/Sec |
| 10.Servo Motor Drive/Type |
Ac Synchronus stepper motor & opto coupler based traic drive |
| 11.Display Type |
LCD |
| 12.Displayed Parameter |
Input/Output Voltages,Hz,amps |
| 13.Protections |
Under Voltage/Over Voltage cutoff,Overload and short circuit protection |
| 14.Type & Control Design |
Micro Controlled (DSP) based with O/P Sensing feedback system |
| 15.Operating Temperature |
0-50 degree celsius |
| 16.Manual By Pass Facility |
Through change over switch above 5kva |
| 17.Front Panel |
Enter,Up/Down key |
| 18.Distoration of waveform |
Nil(Same as Input) |
| 19.Effect of Load PF |
Nil(on output voltage) |
| 20.Nature of winding |
Copper Variacs |
| 21.Enclosure |
CRCA mild steel |
| 22.Standard of Stabilizer |
As per I.S. 9815 |
| 23.Oil standard |
As per I.S 335 |
